Blog/content/post/14-migration-opnsense-proxmox-highly-available.md

---
slug:
title: Template
description:
date:
draft: true
tags:
  - opnsense
  - high-availability
  - proxmox
categories:
---

## Intro

In my previous [post]({{< ref "post/12-opnsense-virtualization-highly-available" >}}), I've set up a PoC to validate the possibility to create a cluster of 2 **OPNsense** VMs in **Proxmox VE** and make the firewall highly available.

This time, I will cover the creation of my future OPNsense cluster from scratch, plan the cut over and finally migrate from my current physical box.

---
## Build the Foundation

For the real thing, I'll have to connect the WAN, coming from my ISP box, to my main switch. For that I have to add a VLAN to transport this flow to my Proxmox nodes.

### UniFi

The first thing I do is to configure my layer 2 network which is managed by UniFi. There I need to create two VLANs:
- *WAN* (20): transport the WAN between my ISP box and my Proxmox nodes.
- *pfSync* (44), communication between my OPNsense nodes.

In the UniFi controller, in `Settings` > `Networks`, I add a `New Virtual Network`. I name it `WAN` and give it the VLAN ID 20:
![unifi-add-vlan-for-wan.png](img/unifi-add-vlan-for-wan.png)

I do the same thing again for the `pfSync` VLAN with the VLAN ID 44.

I will plug my ISP box on the port 15 of my switch, which is disabled for now. I set it as active, set the native VLAN on the newly created one `WAN (20)` and disable trunking:
![unifi-enable-port-wan-vlan.png](img/unifi-enable-port-wan-vlan.png)

Once this setting applied, I make sure that only the ports where are connected my Proxmox nodes propagate these VLAN on their trunk.

We are done with UniFi configuration.

### Proxmox SDN

Now that the VLAN can reach my nodes, I want to handle it in the Proxmox SDN.

In `Datacenter` > `SDN` > `VNets`, I create a new VNet, name it `vlan20` to follow my own naming convention, give it the *WAN* alias and use the tag (ID) 20:
![proxmox-sdn-new-vnet-wan.png](img/proxmox-sdn-new-vnet-wan.png)

I also create the `vlan44` for the *pfSync* VLAN, then I apply this configuration and we are done with the SDN.

---
## Create the VMs

Now that the VLAN configuration is done, I can start buiding the virtual machines on Proxmox.

The first VM is named `cerbere-head1` (I didn't tell you? My current firewall is named `cerbere`, it makes even more sense now!) Here are the settings:
- OS type: Linux
- Machine type: `q35`
- BIOS: `OVMF (UEFI)`
- Disk: 20 GiB on Ceph storage
- CPU/RAM: 2 vCPU, 4 GiB RAM
- NICs:
	1. `vmbr0` (*Mgmt*)
	2. `vlan20` (*WAN*)
	3. `vlan13` *(User)*
	4. `vlan37` *(IoT)*
	5. `vlan44` *(pfSync)*
	6. `vlan55` *(DMZ)*
	7. `vlan66` *(Lab)*
![proxmox-cerbere-vm-settings.png](img/proxmox-cerbere-vm-settings.png)

ℹ️ Now I clone that VM to create `cerbere-head2`, then I proceed with OPNsense installation. I don't want to go into much details about OPNsense installation, I already documented it in a previous [post]({{< ref "post/12-opnsense-virtualization-highly-available" >}}).

After the installation of both OPNsense instances, I give to each of them their IP in the *Mgmt* network:
- `cerbere-head1`: `192.168.88.2/24`
- `cerbere-head2`: `192.168.88.3/24`

While these routers are not managing the networks, I give them my current OPNsense routeur as gateway (`192.168.88.1`) to able to reach them from my PC in another VLAN.

---
## Configure OPNsense

Initially, I thought about restoring my current OPNsense configuration and adapt it to the setup.

Then I decided to start over to document and share it. This part was getting so long that I prefered create a dedicated post instead.

📖 You can find the details of the full OPNsense configuration in that [article]({{< ref "post/13-opnsense-full-configuration" >}}).


## TODO

HA in proxmox
Make sure VM start at proxmox boot
Check conso Watt average
Check temp average
## Switch

Backup OPNsense box
Disable DHCP on OPNsene box
Change OPNsense box IPs

Remove GW on VM
Configure DHCP on both instance
Enable DHCP on VM
Change VIP on VM
Replicate configuration on VM
Unplug OPNsense box WAN
Plug WAN on port 15


## Verify

Ping VIP
Vérifier interface
tests locaux (ssh, ping)

Basic (dhcp, dns, internet)
Firewall
All sites
mDNS (chromecast)
VPN
TV

Vérifier tous les devices

DNS blocklist

Check load (ram, cpu)
Failover

Test proxmox full shutdown

## Clean Up

Shutdown OPNsense
Check watt
Check temp

## Rollback